Translations:Инструкция для Cisco SPA122 ATA with Router/1/en

Материал из wiki.directphone.net
Версия от 16:41, 16 октября 2018; Krown1900 (обсуждение | вклад) (Новая страница: «# Turn on the device, connect the SIP device to the Internet. # If you know the IP address of your SIP device, go to step 3 ## Connect a telephone set to the SIP…»)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)
Перейти к: навигация, поиск
  1. Turn on the device, connect the SIP device to the Internet.
  2. If you know the IP address of your SIP device, go to step 3
    1. Connect a telephone set to the SIP device
    2. Lift the handset and dial **** (four stars). You will hear a voice greeting
    3. Dial 110 #, you will hear a voice message with the IP address of the SIP device
  3. Go through the browser into the SIP device web control panel (user name / password is admin / admin by default)
  4. Copy the string http: // <IP address of the SIP device> /admin/resync?http://80.243.15.6:8888/SPA122.xml in the address bar of the browser, replace <IP address of the SIP device> with the IP address of the device and go to the resulting link. After some time, the device will automatically reboot and connect to your SIP account