Instruction for Cisco SPA122 ATA with Router

1. Turn on the device, connect the SIP device to the Internet.
2. If you know the IP address of your SIP device, go to step 3
   1. Connect a telephone set to the SIP device
   2. Lift the handset and dial **** (four stars). You will hear a voice greeting
   3. Dial 110 #, you will hear a voice message with the IP address of the SIP device
3. Go through the browser into the SIP device web control panel (user name / password is admin / admin by default)
4. Copy the string http: // <IP address of the SIP device> /admin/resync?http://80.243.15.6:8888/SPA122.xml in the address bar of the browser, replace <IP address of the SIP device> with the IP address of the device and go to the resulting link. After some time, the device will automatically reboot and connect to your SIP account